More capacity, better filtration!

The FG-450 filter uses the same parts as the FG-300 microfilter model. Two cartridges in the same casing. This multiplies the durability of the cartridges when working at lower pressure, and improves the filtration capacity.

– Longer time before replacing cartridges.

– Higher durability of each cartridge. By having a higher capacity housing, the filters work at lower saturation per second. This results in the full utilization of the entire surface of the filter and/or absorbent paper.

– Better filtration. The larger the filter surface, the better filtration.

• It is suitable for particle microfiltration from 3 to 15 µm (micron) (the filtering paper is water absorbent) or 50 µm (micron). It is possible to drain through the manual drain valve placed in the microfilter bottom.
• This microfilter has been made for the diesel, petrol, kerosene, AVGAS, JET A-1, and, in general, hydrocarbon liquid microfiltration.
• Differential manometer that shows the filter saturation level
• The microfilter is supplied with the filtering element installed.

TECHNICAL FEATURES

• Filtration
  • 3 µm (micron) · water absorbent (mod. FG-450/3)
  • 5 µm (micron) · water absorbent (mod. FG-450/5)
  • 15 µm (micron) · water absorbent (mod. FG-450/15)
  • 50 µm (micron) (mod. FG-450/50)
• Capacity: 30 litres in the housing interior
• Flow: 450 l/min
• Microfilter cover and heading: Aluminium
• Body made of AISI-304 stainless steel
• Differential manometer
• Inlet/Outlet Connections: F2″ BSP or flange
• Manual lower drain valve
• Superior drain valve to eliminate the inner air of the filter
• Installation: in the suction or delivery of the dispenser
• Maximum operating pressure: 6 bar
• Maximum housing pressure: 10 bar

Size and weight (approx.):

• Dim.: Ø254x312x1150 mm (Ø x base x height)
• Weight: 27 kg